Bathroom fan Eol F15T INOX
Bathroom fan Eol F15T INOX
Couldn't load pickup availability
- Rated voltage: 230 V
- Colour: inox (stainless steel finish)
- Mains frequency: 50 Hz
- Power consumption: 22 W
- Air flow: 200 m³/h
- Bearing type: sleeve bearing
- Degree of protection (IP): IP-X4
- Sound pressure level: 45 dB (A)
- Speed: 1850 rpm
- Nominal diameter: 150 mm
- Material: ABS/PP, front: stainless steel
- Mounting location: wall
- Mounting type: surface-mounted
- Fan weight: 0.77 kg
- A: 170 mm
- B: 183 mm
- C: 88 mm
- D: 149 mm
- E: 30 mm
- Mounting hole: Ø150 mm

Fans designed to support ventilation in residential and commercial premises. They stand out for quiet operation, high performance and reliability. High-quality plastic ensures durability and a lasting aesthetic appearance.
The fan is an ideal solution for bathrooms and toilets. It supports natural (gravity) ventilation and can be installed in rooms with individual ventilation ducts – in residential buildings, collective housing and public buildings. It must not be used in rooms where a corrosive or explosive atmosphere may occur.
Model T – fan with a run-on timer. The fan must be connected to an electrical switch – the existing light switch in the ventilated room can be used for this purpose. After the switch is turned off, the fan keeps running for the set time. The delay time is set with a potentiometer on the control board, in the range from 0.5 to 30 minutes.
Construction: Fan made of high-quality ABS plastic with a stainless steel front panel.
Installation:
- Wall mounting
- For indoor use
- Fixing with screws
Equipment:
- Timer module
Share
